<address id="4b5nt"><track id="4b5nt"><dd id="4b5nt"></dd></track></address>

  1. <noscript id="4b5nt"></noscript>
  2. Satons
    Home > Product center > Input filter
    Input filter
    Input filterRFI Series
    Product introduction
    Radio interference input filter can effectively inhibit the audio equipment, close to the frequency converter installation.
    Data download
    One, product features

    Radio interference input filter can effectively inhibit the audio equipment, close to the frequency converter installation;

    Installed at the input side converter;

    Input filter for wavelength range 100K to 30MHz;

    When the noise jamming equipment installed in the inverter near, input filterusing this type of.

    Two, the product parameters

    Rated voltage: 440/250VAC; 1140/690VAC (can be customized with differentvoltage grades)

    Test voltage (1 minutes): line to line 1500VDC line to the 1500VAC/2500VDC

    Insulation resistance: line to ground (300A)  1500M

    Output impedance: 1 (K Ω

    Input impedance: 5 (K Ω

    The stopband attenuation (dB): 10

    Insertion loss (dB): 35

    The reference temperature: -25 ~ 85 (c)

    Drive level: 30 (mW)

    Load resonant resistance: 35 (Ω

    The load capacitance (pF): 60

    The total frequency difference: 15 (MHz)

    The temperature and frequency difference: 5 (MHz)

    Adjust the frequency difference: 60 (MHz)

    The nominal frequency (MHz): 50/60

    Category: filter

    Model No.: RFI-200

    Brand:Satons
    Share to your:

    Blog roll

    All rights reserved: Satons (Shanghai) power supply co., LTD. | Tel:+86-21-6461 9085/6461 9086 | Web site:www.candiceglover-official.com | Shanghai ICP prepared No 09099323-2
    Technical support:薩頓斯(上海)電源有限公司 點擊這里給我發送消息
    2分pk10